Manure

Manure Storage

A manure resistant foil, which is very strong and has high chemical resistance, must be used when constructing a manure storage basin to prevent the contamination of groundwater.

The following is used:
• LDPE foil 1 mm or 0.80 mm thick in black unreinforced.
• PVC (manure quality) foil of 1 mm thick in black unreinforced.
• PVC reinforced polyester of 900 or 1.100 gr m² (manure quality) in green or gray.

The following designs and systems are possible:

Liners


DL PLASTICS B.V. manufactures and installs manure liners to be used in manure storage tanks in various diameters and heights. The liner consists of unreinforced PVC manure quality 1 mm with a reinforced PVC edge that hangs over the edge of the tank. The liner is attached to the tank with the aid of ratchets or cord for tensioning.

In consultation the liners can also be delivered in the following grades:
• PVC reinforced polyester
• LDPE 1 mm thick unreinforced

Our liners are supplied, in consultation, complete with wall protection, ratchets and cord.

Floating Covers


To cover the manure tank, we also deliver floating covers. These covers are delivered, in consultation, with vents, HDPE tube, cord/rope for tensioning and mixing hatch. The materials used are, in consultation, unreinforced PVC 1 mm in black, unreinforced LDPE 080 or 1 mm thick in black or PVC reinforced polyester 900 gram per m² either in green or grey colours.

Silocovers


Assembling, supply and installation of the so called tensile structures to cover storage silos is one of our standard procedures daily performed in our company. The so called span caps or silo caps are used as a top cover for wooden, steel and concrete silos to prevent that rainwater comes in the silo, or to prevent that toxic gases, or other harmful substance get spread in the environment. Prevent bad odor and poison emulsion that makes the air that we humans and animals need to live a lot healthier and pleasant.

DL-AIRCOVER


After a long period of extensive testing, DL PLASTICS B.V. developed a new cover for Tanks and Silo's The so-called "DL- Aircover". The DL-Aircover is extremely suitable as a top sealing of all type of Tanks and Silo's made of Steel, Wood or Concrete. The DL-Aircover is made of very high quality Polyester reinforced PVC fabrics, approved by KIWA. For the stability and the support is under the DL-Aircover a telescopic middle column installed. The correct shape and the stable construction of is created by a fan that blows the air continuous under the cover.

Manure bags


The manure bag is delivered in a square or rectangular shape, in consultation, with an inspection hatch. Furthermore, in consultation, pipes and seals are included. The material is especially designed for manure storage and consists of a polyester fabric with a PVC coating. Total weight approximately 1100 gr m². The seams are both thermally and high frequency welded.

The bags can be supplied with a capacity of 1000 m³. The whole can be assembled on site by us. To avoid being blown about by the wind, due to vacuum suction, the whole is tensioned and secured with traps and fastened with picket posts.

Benefits:

• Suitable for soft ground, aesthetic (environmentally less obtrusive)
• No rain in the manure (closed system)
• Easy to build
• No odour
• No need for planning permission
• Moveable
• U.V. (Sunlight) resistant
• Frost resistant to -30°C
• Acid and salt-resistant
• Long lifespan

Lagoon liners




• Bottom layer, rectangular cover sheets in various sizes, virtually unlimited in size.
• Top layer, in the same size as the bottom layer, with or without mixing hatch and vents.

These cover sheets can also be supplied in various grades. Reinforced or unreinforced PVC or LDPE.

“ DL – FlexBag “


For temporary expansion of your manure storage capacity DL Plastics B.V. developed a plastic bag named DL- Flex-Bag, suitable for the storage of liquid manure. These bags are easy to remove and to transport and to install at another location.

They are produced and welded in model with specially developed High-Frequent welding machinery equipment. Made of a polyester reinforced PVC fabrics material with a weight of 1150 grams per m², this material has a huge tensile strength and meets the very highest demands.

The DL – Flex-Bags are available in various dimensions and a storage capacity of 50 m3 up to 350 m3 and can be installed anywhere on any flat surface.We deliver the bags complete with breathers, fill and outlet with valves and sufficient anchorage points.

They are easy to fill and to empty and the last remainders can be rinsed out with water.

We deliver the bags complete with breathers, fill and outlet with valves and sufficient anchorage points.

They are easy to fill and to empty and the last remainders can be rinsed out with water.


De Wissel 15 - 9076PT St. Annaparochie - The Netherlands - +31 (0)518 409700 - info@dlplastics.nl